Design assessments

ASIC feasibility study.

Before a project starts: can the product be an ASIC, on which process, at what cost and by when? We answer from your specification, or from the FPGA or board-level design you want to turn into a chip.

For
Product teams weighing an ASIC against an FPGA or standard parts
You provide
Requirements or a specification, target volumes and schedule
You receive
A written feasibility report
Next step
Spec-in design, or a cost and process node assessment

What the study covers

The questions a board will ask, answered one by one.

  1. Function and architecture

    What the chip must do, the architecture options, and what each one costs in area and power.

  2. Process and foundry route

    The candidate process nodes, and the IP and memories each one offers.

  3. Die size and package

    A first estimate of die area, pin count and package.

  4. One-off and unit cost

    Engineering, IP, masks and prototypes on one side; wafers, packaging and test per part on the other.

  5. Schedule

    The path from specification to first parts, stage by stage.

  6. Risks

    What could move the cost or the date, and how each risk can be retired early.

What you receive

A written feasibility report.

  1. A clear recommendation

    Build the ASIC now, wait, or stay with the present solution.

  2. Options side by side

    Architecture and process options, compared.

  3. Cost and schedule ranges

    With the assumptions behind them.

  4. The next stage

    A proposed scope and quotation for the design phase.

Questions about feasibility

When does an ASIC make sense?

When the product's volume and lifetime can carry the one-off cost, or when an FPGA or standard parts cannot reach the power, size or performance you need. The study works out both sides for your product.

Can you start from an FPGA design?

Yes. An FPGA design shows the function and gives us RTL to estimate from; the study adds what an ASIC changes: memories, clocking, I/O, test and the process.

Do we need a finished specification?

No. Requirements, target volumes and a schedule are enough to begin; the study shows which open points matter most.

Weighing an ASIC?

Send your requirements, volumes and schedule.

  1. Fill in the project form
  2. We reply by email within a few working days
  3. Onboarding: NDA, design review and a staged plan

The form is the fastest way to reach us. A person reads every request.